|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
7.1.6 DISASSEMBLY DIAGNOSIS OF FJMB ASSY
1 Bonnet and Tray Panel
1 2 3 4 5 6
Remove the Bonnet (Screws � 6) Power ON Tray open (0) Remove the Tray Panel Tray close (0) Pull out the Power Cable from the outlet.
DOUT ASSY : This is not installed to this.
How to Open the Tray by Manual Operating
In the reverse state, pass a small screwdriver through a slit and slide a protruding portion of the Drive Gear of the Loading Mechanism Assy to the direction of arrow. If the Tray moved toward the front about 2 or 3 cm, pull out the Tray by hands. Small Square-bar Screwdriver
Slit
2
Protruding portion
Small Square-bar Screwdriver
4 5 3
Tray Tray Panel Loading Mechanism Assy
35
Drive Gear
2 Front Panel Assy
1 2 3 4
Unclamp the wire. Disconnect the wiring. Unhook (�6) Remove the Front Panel.
3
�3
3 4
�3
Front Panel
2 1
DV-353-K
71
|
