|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
An excellent document to assist in the repair of my old personal tape player. It includes full circuit diagrams and physical layout drawings and full instructions on disassembly and fault finding.
Well worth the meagre price.
;
Very good conversation, Pretty fast Service, wood do it again,
Have paid by Paypal, so i got the Service Manual online after 15 Min.
Very helpfully.
Greeting from Germany,
Hans
;
Good-quality scans. Detailed description. I hope I can repair the machine.
;
High-quality scanning. Detailed description. Recommend for all technician. A+++
;
This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
DV-4050-B/DVF-R6030-B
DISASSEMBLY FOR REPAIR
1. How to Remove Tray
1. Remove the front panel and flexible cable. Disassemble the X25 and power supply pcb with sub chassis if it is a difficult. 2. Push and hold the lever( )to clockwise and pull barely out the tray to frontwards( ) where the hook of tray( ) meets with guide( ). 3. Push hooks( ), both sides, inwards and release them from guides( ). 4. Pull hooks of tray( ) outwards and remove the tray upwards( ).
1
HOOK ( 5 x2)
6
3
2
5 x2 4
HOOK
Guide
2. How to Assemble Tray
1. Adjust the position of drive gear as figure( ). Check traverse unit is at the lowest position. 2. Load the tray on the loading mechanism. Check the position where the loading gear(A) is free( ) 3. Meet the hooks with guides and push hooks to load the tray( ). 4. Set the right side hook to loading mechanism( ). 5. Set the left side hook to loading mechanism with pulling it outwards( ). 6. Push the tray backwards( ).
5
LOADING GEAR (A) (Free) PROTRUSION OF TRAY
1
ARM
2
DRIVE GEAR
REAR
HOOK
6
4 3
HOOK
GUIDE
3
|
|
|
> |
|
