|
There are currently no product reviews.
 ;
This schema available for me in good condition. I would highly recommend.
;
Thanks for this "hard to find" service manual.
I apreciate the good quality of scanning and the pages scanned in A3 format.
;
Helpd me mont a new carradio when prewius mont was a mess.
;
Very good service and quick service, very good quality of service manual!
;
Great tape deck manual!
I'm very positively surprised, because it is a very long manual, lot of pages, drawings, diagrams, description of how to make the alignment and adjustment procedures.
It is as good as the old "Naka" manuals from the 1970's - if somebody have seen them, they know what I mean by that.
I recommend to buy this very much !
DV-5050M/5900M/DVF-J6050/J6050-G
ADJUSTMENT
DVF-J6050 E version No. 1 ITEM INPUT SETTING 100% COLOR BAR DISC OUTPUT SETTING Connect the oscilloscope to composite(X13,J4) with 75-ohms resistor ALIGNMENT POINT VR301(X35) ALIGNMENT FOR Y-signal = 1000mV±30mV Chrom-signal = 300mV±15mV FIG. FIG.1.
Y LEVEL
2
CHROM LEVEL
� 100% COLOR Connect the oscilloscope to BAR DISC composite(X13,J4) with 75- VR304(X35) � PAL DISC (PAL MODE) ohms resistor Connect the oscilloscope to Y output(X13,J6) with 75-ohms resistor VR600(X25)
FIG.2.
3
YCb Cr LEVEL 100% COLOR (DVF-J6050 only) BAR DISC
Y-signal = 1000mV±30mV
FIG.1.
[mV]
700(100IRE)
700
white yellow
623 490
cyan green 413 magenta 287 red
210
blue
77
1000mV±30mV
black
0
0
4.7µs
-300
Y
Fig. 1
IRE Peak white
Y Level 1000mV ±30mV
C Level 300mV ±15mV
0 Blank
Sync. chip
Fig. 2
27
|
