|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Audio Settings and Video Adjust menus
06
Chapter 6
Audio Settings and Video Adjust menus
Audio Settings menu
The Audio Settings menu offers features for adjusting the way discs sound. 1 Press HOME MENU and select �Audio Settings� from the on-screen display.
Audio Settings
Note � Audio DRC is only effective with Dolby Digital audio sources. � Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out is set to Dolby Digital > PCM (see Digital Audio Out settings on page 38). � The effect of Audio DRC also depends on your speakers and AV receiver settings.
2 /
Select and change settings using the / (cursor) buttons, and ENTER.
Audio Settings Virtual Surround Audio DRC Dialog On Off
/
Virtual Surround
� Settings: On, Off (default) Switch on Virtual Surround to enjoy realistic surround sound effects from just two speakers. Tip
Audio DRC
� Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, it�s easy to lose the quieter sounds completely�including some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material you�re listening to. If the material doesn�t have wide variations in volume, you may not notice much change.
� You can also use the SURROUND button on the remote control to switch Virtual Surround on. Note � 96 kHz linear PCM audio is automatically downsampled to 48 kHz if Virtual Surround is switched on. � The Audio Output Mode (see page 44) must be set to 2 Channel in order to be able to use Virtual Surround.
35
En
|
|
|
> |
|