|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
Connect with TV 1.Normal Connection
Connect the player and the appropriate port of TV set with video/audio wire, as indicated in the right picture:
2.Connect with S-video Terminal
Connect one end of the S-video wire with S-video output socket on DVD back-panel and another with the S-video input socket of the TV, and then connect audio wire with the TV.
3.Connect with YUV (Y Pb/Cb Pr/Cr) Terminal
Connect the Y, Pb/Cb, Pr/Cr jacks on the disc player and the corresponding jacks on the TV with audio cord. After that, connect disc player to TV with audio cord. For a Progressive Scanning TV set, press the PS key on the remote control after DVD has read the disc. Then, the DVD player will shift to the progressive output mode and there may be no picture on the TV screen. You can recover the picture by shifting the video mode of the TV set to the progressive scanning one.
|
|
|
> |
|
