PHILIPS DVD737/02
Service Manual

2-1

DISMANTLING INSTRUCTIONS
Dismantling of the Front Panel assembly 1) Open the Tray and remove the tray cover assy (pos 10119-1 + 101-19-5) and remove it as shown in figure 1. Note: The Tray can be manually open by inserting a minus screw driver (approximately 9mm) and push lever in the direction shown in figure 2. 2) Loosen the 5 screws to dismantle the Top Cover (pos 252) - 2 screws on each side - 3 screws on the Rear Panel (pos 251). 3) Uncatch 6 catches (2x on side & 2x on the bottom and 2x on the Loader C2) to slide the Front Panel assembly (pos 101) as per figure 3.

Figure 1

Figure 2