This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
Das Service Manual war von der ersten bis zur letzten Seite sehr informativ und hilfreich. Die Darstellung aller Teile war klar und der Text gut lesbar.
Vielen Dank, das war nicht der letzte Download bei ownner-manuals.com.
Text excerpt from page 5 (click to view)
2-1
DISMANTLING INSTRUCTIONS
Dismantling of the Front Panel assembly 1) Open the Tray and remove the tray cover assy (pos 10119-1 + 101-19-5) and remove it as shown in figure 1. Note: The Tray can be manually open by inserting a minus screw driver (approximately 9mm) and push lever in the direction shown in figure 2. 2) Loosen the 5 screws to dismantle the Top Cover (pos 252) - 2 screws on each side - 3 screws on the Rear Panel (pos 251). 3) Uncatch 6 catches (2x on side & 2x on the bottom and 2x on the Loader C2) to slide the Front Panel assembly (pos 101) as per figure 3.