|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This scanned manual is well done in that most all the pages except for one is straight and clear- the way I would do them. One page was upside down but that happens. For the money that is charged on this site you get a pretty good deal. Now with complex repairs, I still prefer to us paper manuals which I have to buy at stereomanuals but the one I got here was much less than the $45 he was charging but this is a larger than normal manual for three different units. I am a picky manual user because I have used original manuals from Sony and Teac.
;
Very useful service manual, was exactly what i needed.Good quality,reasonable price.Thank you.
;
Acurate informations inside the SM and I could repair my old Sansui SC-3330 without any problems. Thanks.
;
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
DVD-CP67PP
12.11. Optical Pickup Unit
Step 1 Unscrew the screws. Step 2 Remove the spring holders and the springs. Step 3 Pull out the drive shaft and guide shaft. The optical pickup can be damaged by static electricity from your body. Be sure to take static electricity countermeasures when working around the optical pickup. (Refer to the related page in this Manual about the countermeasures.) 1. Do not touch laser diode, actuator and their peripheries. 2. Do not use tester to check laser diode. (Laser diode can be damaged easily.) 3. The use of soldering iron with anti-static feature is recommended when providing short-circuit to laser diode or when removing it. 4. Solder the land on flexible cable of optical pickup unit. Caution · When using the soldering iron without anti-static feature, short circuit the flexible cable terminal with a clip before short-circuiting the land. · After intended repair is finished, remove the solder for short-circuit of laser diode in a correct way following the procedure described in this Manual.
12.11.1. Precautions in optical pickup replacement
12.12. Disassembling the Spindle Motor Unit
Step 1 Remove the floating rubbers.
32
|
|
|
> |
|
