I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
Tray
5. Remove the drive arm concave phase from the tray slider and tray.
1. Slide the guide tray unit while pressing the stopper in the arrow direction, and remove the guide tray unit.
2. Raise the loading unit. 3. Slide the lever in the arrow direction till it stops and pull the tray out.
<Assembling the tray unit> 1. Insert a part of the tray into the unit sliding over the groove on the mechanical chassis unit. 2. Insert the tray to the point before the tab of the mechanical chassis unit.
4. Spread the tabs at the both sides and pull the tray out. (The tray slides a little forward and stops.)
3. Hook the drive arm concave phase over the tray and the tray slider. 4. Press in the tray. 5. Make sure that the tray and the drive arm move smoothly.