The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Text excerpt from page 6 (click to view)
DV-K750/S700
DISASSEMBLY FOR REPAIR
3. Traverse Unit
1. Remove the screws fixing the plate spring, the chassis stopper and the spring. 2. Lift the back of the traverse unit and remove it.
How to Assemble
1. Loading Mechanism
This mechanism has no order for assembling the loading parts.
TRAY GEAR
CONNECTING POINT
2. Traverse Unit
1. Pass the flexible cable from the inside of the loading base to the outside of that. 2. Insert the top of the traverse unit to the groove of the rotary cam and fix it with screws.
TRAVERSE UNIT
4. Loading Mechanism Parts
1.The loading parts is avalable without disassemble. Refer to the followings.
LOADING BASE TRAY GEAR GEAR ROTARY CAM TRAY GEAR