SHARP DVL80S
Owner's Manual

Using the Battery Pack

1

Plug the AC cord into the power socket of the AC adapter (1). � Push the cord straight into the AC adapter as far as it can go. Plug the other end of the AC cord into a household power outlet (2). Plug the DC cord into the battery pack (3).
2

1
2

2 3
SETTING UP

For the U.K. and Eire

DC

IN

V 10

3

POWER (G)/CHARGE (R) Lamp The POWER (G)/CHARGE (R) lamp lights red while charging is in progress, and flashes red when the battery pack is fully charged.

Important!
� Make sure that the Player�s power is turned off before attaching or detaching the AC adapter. � A battery pack that is attached to the Player does not charge while the Player is turned on. Turn power off in order to charge the battery pack. � Before storing a battery pack, fully discharge it by using it to power Player operation. At least every six months, charge a stored battery pack and use it to power the Player.

� The battery pack becomes warm when charging. This is normal and does not indicate abnormality. � If the POWER (G)/CHARGE (R) lamp flashes red at high speed or does not light red when charging, it could mean the battery pack is faulty. See �Troubleshooting� on page 103.

Using the AC adapter with the battery pack � You can charge the battery pack while it is attached to the Player by connecting the AC adapter to the Player and turning off Player power. � The Player is powered by the AC adapter if you turn it on under the above conditions. The battery pack is not charged while Player power is turned on.
GB

30