|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Getting Started
Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.
- - Video Setup Page - TV Type TV Display Progressive Picture Setting HD JPEG HDMI Setup PAL Multi NTSC
CHANGING PAL TO NTSC: 1. ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY.
OK CANCEL
5 Select an item and press OK.
E n g l i s h
� Follow the instructions shown on the TV to confirm the selection (if any). Helpful Hints: � Before changing the current TV Standard setting, ensure that your TV supports the �selected TV Type� system. � If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
NTSC TV
1 Press SETUP. 2 Press 2 to select {VIDEO SETUP PAGE}. 3 Press 3 4 to highlight {TV TYPE}, then
press 2.
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
OK
CANCEL
To reset to default TV colour system manually: G Wait for 15 seconds for auto recovery.
4 Press 3 4 to highlight one of the options
below: PAL � Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC � Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.
1
OR Press and hold EJECT 0 on the DVD player to open the disc tray. EJECT 0 again, and numeric keypad �3� on the remote control for few seconds. � The DVD background screen appears on the TV.
2 When the disc is ejected, press and hold
TIPS:
The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
18
01-45 DVP5965K_98_eng_RC2
18
06/07/06, 1:51 PM
|
|
|
> |
|
