5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Text excerpt from page 15 (click to view)
Basic Connections (continued)
Clean Cloth
A A
B
C
IR
STANDBY/P LAY
C
To lock stand, slide to left
B
Step 2: Placing the unit
Before you start.... � Make sure that all cables have been connected to this unit. � To prevent this unit from being scratched, always covers its front surface with a cloth before you place it flat on any surface. Option 1: Placing on the table top
Option 2: Mounting on the wall CAUTION! Risk of personal injury and damage to the unit. Allow only qualified persons to mount the unit. Note: Mounting accessories not supplied.
A Mark the wall for screw hole positions
where you intend to mount this unit, then drill the screw holes.
A Place this unit on a flat surface with the
front panel facing down.
B Insert the rubber wall plugs and screws
into the holes.
B Place the detachable stand on the rear
panel.
C Hook this unit firmly onto the screws
and lock into position. Helpful Hint: � To remove the stand, press and hold the catch at the extreme right of the rear panel and push the panel towards the right.
C Slide the stand to the left to lock it into
position.
