|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The service manual when downloaded and printed out was clear and easy to read. I would have liked to have been able to enlarge some details, but this was not possible as the file permissions did not allow this. The service was very good. The time taken from placing my order to downloading the document was only a few minutes.
 ;
The manual is useful for trouble shooting for an old instrument. It saved money,and let me enjoy DIY.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Very good scanned copies. Quick response and reasonable price. Thanks for service!
FLOW CHART NO.14 The disc tray cannot be opened and closed. (It can be done using the remote control unit.) Does the voltage of Pin(4) on IC2001 become 75mV when pressing "OPEN/CLOSE" button on the unit? Yes Refer to "FLOW CHART NO.15" <The disc tray cannot be opened and closed.> FLOW CHART NO.15 The disc tray cannot be opened and closed. Replace the DVD Main CBA. No improvement can be found. Yes Replace the DVD Mecha. FLOW CHART NO.16 [No Disc] indicated. (When the focus error occurs.) Replace the DVD Main CBA. No improvement can be found. Yes Replace the DVD Mecha. FLOW CHART NO.17 [No Disc] indicated. (When the focus servo is not functioning.) Replace the DVD Main CBA. No improvement can be found. Yes Replace the DVD Mecha. FLOW CHART NO.18 [No Disc] indicated. (When the laser beam does not light up.) Replace the DVD Main CBA. No improvement can be found. Yes Replace the DVD Mecha. No Original DVD Main CBA is poor. No Original DVD Main CBA is poor. No Original DVD Main CBA is poor. No Original DVD Main CBA is poor. No Replace the "OPEN/CLOSE" button (SW2005).
3-4
|
|
|
> |
|
