HITACHI DVPFEUK
Owner's Manual

DVD SETUP Audio Setting Display Setting

DVD
Set your surround modes for DVD/VCR through your receiver or processor. DVD�s audio setup will not affect CD playback. 1 In STOP menu press SETUP. 2 Press s or B to select �CUSTOM�, then press ENTER. � CUSTOM menu will appear. 3 Press s or B to select �AUDIO�, then ENTER to confirm. 4 Press K or L to select an item, then press ENTER. DRC (Dynamic Range Control) :
AUDIO DRC ON DOWN DIGITAL ON DOLBYSAMPLING BITSTREAM MPEG PCM

DVD
You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD/VCR. 1 Press SETUP in STOP mode. 2 Press s or B to select �CUSTOM�, then press ENTER. � CUSTOM menu will appear. 3 Press s or B to select �DISPLAY�, then press ENTER to confirm. 4 Press K or L to select from an item, then press ENTER. TV ASPECT : QUICK � Press K or L for an item selection, then press ENTER. � 4:3 LETTER BOX displays a theater-like image. Black bars
DISPLAY TV ASPECT STILL MODE ANGLE MARK LOGO 4:3 L-BOX AUTO ON ON

� To compress the range of sound volume. � DRC function is available only on the discs that are recorded in the Dolby Digital format. � The default setting is ON. DOWN SAMPLING : � Set to ON when outputting in 48kHz. � Set to OFF when outputting the original sound. � When playing disc with copyright protection, the sound will be down sampled at 48kHz even if you set it to OFF. � DOWN SAMPLING function is available only on digital output of a disc recorded in 96kHz, and when the unit is connected to another source using the digital out jack. � DOWN SAMPLING function is available only on the discs that are recorded in the Dolby Digital format. � The default setting is ON. DOLBY DIGITAL : Set to BITSTREAM when the DVD/VCR is connected to Dolby Digital Decoder. (BITSTREAM : Dolby Digital OUTPUT) (PCM : Converts the Dolby Digital to PCM) � The default setting is BITSTREAM. MPEG : BITSTREAM: Output MPEG sound Set to BITSTREAM when the unit is connected to an MPEG Decoder � The default setting is PCM. 5 Press SETUP to exit.

QUICK

appear at the top and bottom of the screen. � 4:3 PAN-SCAN is the traditional TV mode with a full height picture with both sides trimmed. � Select 16:9 WIDE if a wide-screen TV is connected to the DVD/VCR. � The default setting is 4:3 LETTER BOX. STILL MODE : � Press K or L for an item selection (AUTO, FIELD or FRAME), then press ENTER. � Select AUTO usually. � If you select FIELD, pictures in the still mode will be stabilized although they will be coarse due to little amount of data. � If you select FRAME, pictures in the still mode will be highly defined although they will be blurred due to output of two fields at the same time. � The default setting is AUTO. ANGLE MARK : � Press ENTER repeatedly to turn Angle mark ON or OFF. � The default setting is ON. LOGO: � Press ENTER to switch ON (opening picture)/OFF (black). � The default setting is ON. 5 Press SETUP to exit. NOTE: � Be sure to press SETUP, or the setting will not work.

QUICK

Virtual Surround

DVD

CD

You can enjoy stereophonic virtual space on your existing 2 channel stereo system. 1 Press SURROUND during playback. 2 Press SURROUND to set it 1(Natural effect), 2(Emphasized OFF effect) or OFF. 3 Press MODE or RETURN to exit. NOTES: � Virtual Surround will not be effective if the surround mode is set to any selection other than STEREO (for CD play only). � Turn down the level or turn it �OFF� if the sound is distorted. � The setting will be saved even if the DVD/VCR is turned off.

� 28 �

EN