This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
Thanks for this "hard to find" service manual.
I apreciate the good quality of scanning and the pages scanned in A3 format.
Text excerpt from page 6 (click to view)
DVP-NC675P
4.
1) 2)
NOTE ON MOUNTING THE GEARS
Mount the gear (chuck). (See Fig. 5) Rotate the gear (chuck) in the direction of the arrow. (down position) (See Fig. 5)
Gear (chuck)
Gear (swing)
5)
Mount the while aligning the engagement of the gear (swing) and the gear (chuck). (See Fig. 7)
Engagement the gear (swing) and the gear (chuck).
Gear (chuck)
Fig. 5.
3) 4)
Connect the boss of the gear (swing) with the groove of the rotary encoder and mount the gear (swing). (See Fig. 6) Align triangle mark of the chassis with the groove of the gear (swing). (See Fig. 6)
Align triangle mark of the chassis with the groove of the gear (swing). Gear (swing)
Fig. 7.
5.
Caution Point on the PWB IF-114
CAUTION When handling IF-114 PWB avoid contact with the sharp metal edge on the top side of Vacuum Fluorescent Display (ND401).
Gear (swing)