|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect, complete manual, exactly what I needed. Recommended to everyone.
;
Very usefull manual. From my point of view there are needs more clearables images.
;
Once again owner-manual.com has saved the day for me, and come through with the manual I need. I looked other places too, and couldn't find it anywhere. Thank You owner-manual.com!!! You're the BEST!
;
very good quality that can be magnified several times, and it remains readable.
For sure I will return next time the need for a service manual arise.
;
The service manual is really great - thanks to it I was able to install the laser unit and thus "save" my CD-player, which seemed to be impossible before I had the manual.
3-1-3. Setting disc When the number of times of aging is set, the table is opened and the following menu appears. Set a test disc while the following menu is displayed.
### Mecha Aging ### Please Set Disc ENTER : Aging Start RIGHT : Disc Skip (Fwd) LEFT _ : Disc Skip (Rvs)
3-1-5. Terminating the aging operation The aging operation terminates when the following conditions are satisfied. � The aging is performed for the set number of times. � The aging is terminated as x (STOP) or O (RETURN) is pressed. � An abnormality occurs in mechanism. When the aging operation ends normally, table is opened and the following menu appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm ENTER RIGHT LEFT _ : : : : Aging Stop 50000 50000 1
Exit: RETURN
When you press 5, the tray moves in the direction of Disc Number +1. When you press %, the tray moves in the direction of Disc Number �1. Press [ENTER] to start aging. 3-1-4. While aging is in progress While aging is in progress, the following screen appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm : : : : Aging Stop 50000 1 1
: Exit : Disc Skip (Fwd) : Disc Skip (Rvs) Exit: RETURN
When you press 5, the tray moves in the direction of Disc Number +1. When you press %, the tray moves in the direction of Disc Number �1. Press [ENTER] to terminate the aging mode after tray is closed and chucked. If any abnormality occurs during the aging mode, the aging operation is stopped and the following menu appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm : : : : Aging Stop 50000 1 1
Exit: RETURN
Max Count indicates the number of times of aging. Now Count indicates the present number of times of aging. Disc Number indicates the disc number of the present chucking position. The indication �DVD SL 12cm� under the Disc Number indicates the disc type when disc check is performed. In addition to it, the following contents are displayed on the FL display tube. A B� C
Table Error! (*1) Table Close Error! (*2) Push Any Key _ Exit: RETURN
*1 indicates the mechanical part where error occurs. *2 shows the mode when error occurs.
�A� indicates the aging mode. 1: All (DiscCheck On) 2: All (DiscCheck Off) 3: Table 4: Tray �B� indicates the aging operation. (Disc number is displayed during the Tray aging mode.) 1: Table Close 2: Chuck Up 3: DiscCheck 4: Table ExOpen 5: Tray ExMove 6: Table ExClose 7: Chuck Down 8: Table Open �C� indicates the number of times of aging. If you press x (STOP) or O (RETURN) during aging, the aging operation is terminated. If you press X (PAUSE) during aging, the aging operation is paused. Pressing any key resumes the aging operation.
6-23
|
|
|
> |
|
