|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manuale perfetto. Ottimo e utilissimo. Grazie a questo manuale ho potuto realmente risolvere il complesso problema della stampante.
;
Manuale perfetto. Ottimo e utilissimo. Grazie a questo manuale ho potuto realmente risolvere il complesso problema della stampante.
 ;
Was very fast and accurate service. Just what I needed. I recommend to everyone.
;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
Notes
� Each item of �VES� is effective on only discs on which a multichannel soundtrack is recorded. Some discs do not have rear sound. In this case, you cannot get the 3D surround effect. � When you select an item, the sound cuts off for a moment. � When the playing signal does not contain the surround component, the effects may be difficult to hear even if you select �VES A� or �VES B.� � If you connect the front speakers only, �NORMAL SURROUND� and �ENHANCED SURROUND� cannot be selected. � The sound does not come from the rear speakers when you set �VES� to �VES A� or �VES B� in the Control Menu display even if you have connected rear speakers. � Set the front speakers to form an equilateral triangle including the listening position, or the effects may be difficult to hear even if you select �VES A� or �VES B.� � When you select �VES A� or �VES B,� the player outputs the audio signal from LINE OUT, DIGITAL OUT (OPTICAL, COAXIAL) or 5.1CH OUTPUT FRONT connectors. In case of the signal from DIGITAL OUT (OPTICAL, COAXIAL), however, the surround effect will be heard only when you play DVD or VIDEO CD with �DOLBY DIGITAL� in �AUDIO SETUP� set to �D-PCM.� � When you play sound tracks with 96 kHz sampling frequency, be sure to select �OFF,� or the output signals will be converted to 48 kHz (sampling frequency). � When you connect a center speaker and a subwoofer, you can also hear the sound from center speaker and a subwoofer. When you select �VES A� or �VES B,� the player does not output the sound from the center speaker. � When you select �VES A� of �VES B,� set the surround settings of the connected units such as the amplifier to OFF.
Using Various Functions with the Control Menu
zYou can select the item of �VES� using the VES button
Press VES on the player. Each time you press the button, the item changes in sequence.
33
|
|
|
> |
|
