|
There are currently no product reviews.
 ;
Everything was ok with the manual. If I have a small complaint, is that I ordered it during the weekend and I think you guys were closed. But I did receive it late Sunday. I will surely order from you again
;
Best Service! Very fast and easy to handle. Fast Download an you can come back every day to download again
;
Very good quality, no parts are missing and everthing is readable.
Thank you very much. :-)
;
This manual is all I need to check and repair my equipment. Thank you....
 ;
sorry for my english...the service given by O.M.com is perfect for content and codition...!!!
thank's a lot!!!
best greetings
2. NOTE ON REMOVE THE CASE
1) Remove seven screws. (See Fig. 1) 2) Open the side of case. (See Fig. 1) 3) Remove the case as lift straight. (See Fig. 1)
Case Two screws Three screws
4.
HOW TO SERVICE MB-85 BOARD
1) Remove the case from the set. (Refer to 2-1) 2) Remove the MB-85 board. (Refer to 2-2) 3) Set the MB-85 board as shown in Fig. 3. Note: Do not disconnect wiring, except FMA-7/8/9.
MB-85 board Two screws grooves
Fig. 1 Fig. 3
3. DISC REMOVAL PROCEDURE (at POWER OFF)
1) Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A. (See Fig. 2) 2) Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 2)
Lever of chuck cam Aperture
B A Tray
Fig. 2
�5�
|
