|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
08
Playing and recording from a DV camcorder
1 Make sure your DV camcorder is connected to the front panel DV IN jack. Also, set the camcorder to VTR mode.
SHIFT REC MODE
Set the recording quality. � See Setting the picture quality/recording time on page 51 for detailed information. 3 From the Initial Setup menu, check that the DV audio input is setup as you would like. See DV Input on page 117 for more on this. � Check also that the Audio In settings for External Audio and Bilingual Recording are as you want them (see Audio In on page 116).
HOME MENU
2
+
� If you restart recording after stopping the camcorder, the first few seconds of the camcorder tape will not be recorded. Use the pause button on your camcorder instead and recording will start immediately. � HDD, DVD (VR Mode) and DVD-RAM only: A chapter marker is inserted every time there is a break in the timecode on the DV tape. This happens when the recording is stopped or paused then restarted, for example. � If you don�t want to see the DV recording screen during recording, press DISPLAY to hide it (press again to display). � While recording, you cannot exit the DV recording screen using the HOME MENU or RETURN button.
4 Select �DV�, then �Copy from a DV Source� from the Home Menu. � DV recording only works when the DV camcorder is in VTR mode with a tape loaded.
ENTER
DV Auto Copy
DV Auto Copy allows you to make an exact copy of the contents of a DV source to the HDD or a DVD. 1 Make sure your DV camcorder is connected to the front panel DV IN jack. Also, set the camcorder to VTR mode.
SHIFT
5 Select �Record to Hard Disk Drive� or �Record to DVD�. 6 Find the place on the camcorder tape that you want to start recording from. For best results, pause playback at the point from which you want to record. � Depending on your camcorder, you can use this recorder�s remote to control the camcorder using the , , , , , and buttons.
ENTER
Set the recording quality. � See Setting the picture quality/recording time on page 51 for detailed information. 3 From the Initial Setup menu, check that the DV audio input is setup as you require. See DV Input on page 117 for more on this. � Check also that the Audio In settings for External Audio and Bilingual
2
+
REC MODE
7
Select �Start Rec�.
Stop 1.02.22 Control with these buttons Start Rec Pause Rec Stop Rec HDD Rem. SP (2h00m/DVD) 32h45m Stop
Recording are as you want them (see Audio In on page 116).
HOME MENU
� You can pause or stop the recording by selecting Pause Rec or Stop Rec from the on-screen display. You cannot control the camcorder from this remote control during recording.
4 Select �DV�, then �DV Auto Copy� from the Home Menu. � DV recording only works when the DV camcorder is in VTR mode with a tape loaded.
76
En
|
|
|
> |
|
