|
There are currently no product reviews.
 ;
complete part-lists and pcb layout, schematic diagram is good enlargable,
 ;
Excellent, fast delivery, excellent product. Good luck!
 ;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
 ;
Great to have extra resources for Service Manuals, Now days you can really not trouble shoot efficiently without one , Wayne at IRIONS TV & ELECTRONICS REPAIR Clearwater , Fl. 33755 727-446-7955
 ;
For five bucks you can barely buy a hamburger. Or for the same five bucks you can buy a service manual. Much more useful. (and better for your health, depending on where you buy your hamburgers).
Yes, there are free manual sites out there, but if they don't have what you want, you have to pay.
And five bucks isn't much. Not for full specs, schematics and adjustment and parts replacement procedures.
My only criticism is that grayscale illustrations aren't well rendered, but I've seen worse.
Schematics and text are clear.
I'll be happy to purchase from here again.
Mike
[email protected]
1
2
3
4
A
AA
The monitor owned by the user may not be compatible with this unit.
B
Is a correct picture displayed when the monitor owned by the user is connected with this unit using a 5-meter cable made by JAE? Yes No
The cable used by the user is in failure. Is a momentary correct picture and a fully black or a snowy screen alternately displayed? Or, another symptom?
C
Confirm the manufacturer and model number, and check symptoms in the following steps, then refer to similar case examples that happened in the past. In some cases, upgrading the software/firmware of this unit may resolve the problem. If there is no measure, ask us for product quality information.
D
1 Does the symptom change when the HDMI cable between the monitor and recorder is disconnected then reconnected? 2 With the HDMI cable between the monitor and this unit connected, if the power to the monitor is turned off then back on again, does the symptom change? 3 Turn off the power to both the recorder and monitor. Then, turn on the monitor, then after 30 seconds, turn on the recorder. Does the symptom change? 4 Is the HDMI LED lit, unlit, or flashing?
E
5 What is the picture on the screen like? A fully black, snowy, combination of the both, or other (a fully green or pink screen)? 6 Does the symptom change if the length of the cable (made by JAE) is different? 7 Are some spots missing by dots (missing pixels) on the screen? If so, there may be problems in the length or quality of the cable or the reception capacity of the monitor. Check if the symptom disappears when a 5-meter or less cable made by JAE is used.
F
42
1 2
DVR-LX61
3 4
|