|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
 ;
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
;
Hi
First, thank you very much for the fast delivery.
I'm really satisfied with your manual. I could find everything, I needed.
I appreciate your service.
Regards from Germany PB
1
2
3
4
8.3 CPRM ID NUMBER AND DATA SETTING
[Purposes]
A
For the DVD recorder,it is necessary with the recoding/playback of DVD-RW disc to set an individual number (ID number) and ID data to each recorder. If the number and data are not set correctly with the following procedure, cannot work with residual quantity 0:00 or operations in the future may not be guaranteed with RW disc. You will find the ID number to be set on the ID label on the rear panel. The Input is Necessary When: � " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode. � When the MAIN ASSY or the HDD is exchanged.
[Tools to be used]
B
DVD Recorder Data Disc (Type 2) Remote control unit supplied with the unit Remote control unit for servicing (GGF1381)
Be sure to use the latest disc (Type 2). In Apr. 2008, the latest disc is GGV1321.
C
[Notes]
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to confirm the ID number" shown below. � Input the ID number while the unit is in Stop mode. � After the data are read from the data disc (Type 2), the disc will automatically be unloaded.
D
E
F
84
1 2
DVR-660H-K
3 4
|
|
|
> |
|
