|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Clear and complete service manual. Easy now to restore my old Kenwood KD-1500.
Thanks a lot.
;
Thanks for this "hard to find" service manual. This Sony PS212A is a very good turntable that needed to be restored !
 ;
Excellent quality on these manuals. Same as having the original printed manual and incredibly useful when doing a custom install like me. Keep it up on the good work.
;
This is an excellent information source. Great quality and tons of info regarding technical service for the Technics SH8065.
;
5 stars on this manual since it is the complete version, not the half manual you find free for download all over the web. Good job.
DVR-7000
4.2 MAIN ASSY ADJUSTMENT
Note : Use disc : [ PAL DVD test disc ] No.
1
It is recommended to adjust using PAL Disc. Adjustment Value
27.000000MHZ ± 130Hz
Adjustment Name
Master clock free-running adjustment (Clock system adjustment)
Adj. Point Measurement Point
VC3001 MAIN ASSY IC4007 Pin54 (CLKO) (M65774AFP) Y output of S terminal (75� termination)
Adjustment State
No input signal or during test disc playback Playback the PAL DVD test disc(100% color-bar). Terminate the Y output of S terminal with 75� and adjust so that the level of between sync tip and white peak becomes 1.0Vp-p. Playback the PAL DVD test disc(100%colorbar). Terminate the C output of S terminal with 75� and adjust so that the amplitude of color burst becomes 300mVp-p. Playback the PAL DVD test disc(100% color-bar). At the pin 11 of CN7001 in the MAIN ASSY, adjust so that the level of between sync tip and white peak becomes 760mVp-p. Playback the PAL DVD test disc(100%colorbar). At the pin 13 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 520mVp-p in the 100% color-bar screen. Playback the PAL DVD test disc(100%colorbar). At the pin 15 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 520mVp-p in the 100% color-bar screen.
2
Y level adjustment of CVBS system (Output system adjustment)
VR7002
1.0Vp-p ± 40mV
3
C level adjustment of CVBS system (Output system adjustment)
VR7001
C output of S terminal (75� termination)
300mVp-p ± 12mV
4
Y level adjustment of component system (Output system adjustment)
VR7003
MAIN ASSY CN7001 Pin11 (Y(G) Out)
760mVp-p ± 22mV
5
PB level adjustment of component system (Output system adjustment)
VR7004
MAIN ASSY CN7001 Pin13 (PB(B) Out)
520mVp-p ± 15mV
6
PR level adjustment of component system (Output system adjustment)
VR7005
MAIN ASSY CN7001 Pin15 (PR(R) Out)
520mVp-p ± 15mV
When NTSC test disc GGV1025 is used, the adjustment No.2 to No.6 value is changed to the following value. No.
2
Adjustment Name
Y level adjustment of CVBS system (Output system adjustment)
Adj. Point Measurement Point
VR7002 Y output of S terminal (75� termination)
Adjustment Value
980mVp-p ± 39mV
Adjustment State
Playback the NTSC DVD test disc (75% color-bar). Terminate the Y output of S terminal with 75� and adjust so that the level of between sync tip and white peak becomes 980mVp-p.
3
C level adjustment of CVBS system (Output system adjustment)
VR7001
C output of S terminal (75� termination)
280mVp-p ± 11mV
Playback the NTSC DVD test disc(75%colorbar).Terminate the C output of S terminal with 75� and adjust so that the amplitude of color burst becomes 280mVp-p. Playback the NTSC DVD test disc (75% color-bar). At the pin 11 of CN7001 in the MAIN ASSY, adjust so that the level of between sync tip and white peak becomes 745mVp-p. Playback the NTSC DVD test disc(75%colorbar). At the pin 13 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 390mVp-p in the 75% color-bar screen. Playback the NTSC DVD test disc (75% color- bar). At the pin 15 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 390mVp-p in the 75% color-bar screen.
4
Y level adjustment of component system (Output system adjustment)
VR7003
MAIN ASSY CN7001 Pin11 (Y(G) Out)
745mVp-p ± 22mV
5
PB level adjustment of component system (Output system adjustment)
VR7004
MAIN ASSY CN7001 Pin13 (PB(B) Out)
390mVp-p ± 12mV
6
PR level adjustment of component system (Output system adjustment)
VR7005
MAIN ASSY CN7001 Pin15 (PR(R) Out)
390mVp-p ± 12mV
Note : Do the MAIN ASSY adjustment first, before TUMJ ASSY adjustment. When using 75% color bar, adjust making PB/PR output to 75%.
45
|
|
|
> |
|
