|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Timer Recording
6 After making the settings, press ENTER.
The program details are shown at the bottom of the screen for a few seconds then the screen is automatically exited.
6
G-Code programming with the power off
You can enter a G-Code programming number when the recorder is in standby.
If you haven�t set up the guide channels (or at least the guide channel for the G-Code programming number that you entered), the recorder will prompt you to enter the channel number that the TV program is showing on.
� You can�t use this feature until you have set up the guide channels. See page 28. � You can�t change the recording mode. � You can�t program daily or weekly timer recordings.
1
Press the G-CODE button.
The front panel display shows the current recording mode and prompts you to enter the G-Code programming number.
2 7 Make sure that you switch the recorder into standby before the timer recording is due to start.
Timer recording will not work if the recorder is left on! � The recorder will automatically switch on two minutes before the timer recording is due to start.
Use the number buttons to enter the G-Code programming number.
� To clear the last digit entered, press CLEAR.
3
Press ENTER.
The display shows the timer settings: Date = Start time = Stop time = Recording mode/channel. � If CODE ERROR appears in the display, check the G-Code number and start again from step 1. � If CANNOT RECORD appears in the display, it means that although you entered a valid G-Code number, the program cannot be recorded for some other reason (if there is a timer recording already set for that time, for example).
� If you need to check or change anything in the program, press SETUP, then ENTER to display the timer recording program screen. From here you can check, change or clear any settings you want.
61
En
|
|
|
> |
|
