PIONEER DVR-720H-S/WVXK
Owner's Manual

Copying and back-up

07

Recording the Copy List
After putting together your Copy List, you�re ready to record it. 1 Select �Conf List� to display the Copy List settings screen. 2 Use the / (cursor left/right) buttons to select the Recording Mode.
HDD to DVD Copy
HDD

HDD to DVD Copy List commands
Add
Use this command to add titles to the Copy List. 1 Select �Add� from the Copy List menu options.

2 Use the / (cursor left/right) buttons to select a title from the HDD to add to the Copy List, then press ENTER.
HDD to DVD Copy
HDD

HDD

DVD-RW VIDEO

Required 0h08m High Speed Start

Recording Mode Add Erase Ttl Name Divide Combine Conf List

All 1

2

3

4

HDD
16:00 Sun 11/8 Pr 5 LP Recording Time 0h32m55s

Copy List Total Current DVD Remain

1175MB 2830MB / 4700MB Add Erase Ttl Name Divide Combine Conf List

1/3 4

DVD

1

2

3

Copy List

Total 1h30m

1/2

� High-Speed Copy � The Copy List is copied at the same recording quality as the original. (See page 61 for more information on high-speed copying.) � FINE, SP, LP, EP, MN � The Copy List is copied at the specified recording quality in real-time. (Note that if you copy at a higher quality setting than the original, the copy will not be better quality than the original.) � If you select MN above, you can also change the level setting (MN1�MN32) from the Recording Quality box that appears. � Optimized � The recording quality automatically adjusted so that the Copy List fits on to the space available on the disc. Copying is carried out in realtime. When you change the recording mode setting, you can see how much disc space it will require. If this is more than is available, it shows up in red and you won�t be able to start copying. In this case, either change the recording quality, or press RETURN to go back to the Copy List screen and erase one or more titles from the Copy List. 3 Select �Start� to begin copying. Note � When the copy mode is set to something other than High-Speed Copy for copying to a Video mode DVD, the chapter markers of the original are not copied. Chapter markers are put into the copy at regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) on page 108).

The thumbnail appears in the Copy List section in the lower half of the screen. If there are already titles in the Copy List, the title is added at the end. 3 Repeat step 2 to add more titles to the Copy List, or press RETURN to go back to the Copy List menu options. Note � When Frame Accurate is set to Off (see Frame Accurate on page 108), the following limitations on adding titles to the Copy List apply: � When adding titles that contain copy-once protected material, the copy-once parts will not be added to the Copy List. � When adding titles that contain material of more than one aspect ratio (screen size), each part with a different aspect ratio will be added as a separate title. � Widescreen material recorded in LP, EP or MN1�18 will not be added to the Copy List. � Chapter markers on the copy may be up to 0.5 seconds off compared to the original. � Only titles which were recorded in the same TV system as the recorder is currently set to can be added to the Copy List.

65
En