5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 134 (click to view)
15
The Video Adjust menu
� Chroma Level � Adjusts how rich the colours appear. Select the setting you want to
ENTER
ENTER
3 adjust.
Memory1
Pr 1
4 setting.
Adjust the currently selected
Prog. Motion PureCinma 3-D Y/C YNR CNR White AGC White Level
Motion Auto1 Motion Off Off Off Min
Still
Still Max Max
5 HOME MENU Press to exit. You can now use the preset for any other input or the built-in TV tuner.
Max
Tip � To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.
You can adjust the following settings: � Prog. Motion � Adjusts the motion and still picture quality when video output is set to progressive. PureCinema � This setting optimizes the picture for film material when the video output is set to progressive. Usually set to Auto; but try switching to Off if the picture appears unnatural. 3-D Y/C � Adjusts the brightness / colour separation (NTSC video input only). YNR � Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component. CNR � Adjusts the amount of noise reduction (NR) applied to the C (colour) component. White AGC � Turn on for automatic white level adjustment.1
�
�
�
�
�
� White Level � Adjusts the intensity of white. � Black Level � Adjusts the intensity of black. � Black Setup � Corrects the standard reference black level (NTSC video input only). � Hue � Adjusts overall balance between red and green.
134
En
Note 1 When White AGC is On, the White Level setting can�t be adjusted.
