|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
 ;
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
;
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
;
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
;
The owners manual is very good. all my how to questions were answered in detail.
OPERATION
Replacing the filter
1. Hold both ends of the filter cover and slide it in the direction indicated by the arrow in the diagram below to remove the cover.
Emergency Disc Removal
In the following cases, discs can be ejected using the emergency ejection hole. ÷ Trouble with the device makes it impossible to remove the disc using the OPEN/CLOSE button or a software command. ÷ A disc that you need to eject remains inside the device but the power is off. 1. Confirm that the power for the device is OFF and that the disc has stopped spinning. 2. Remove the filter cover in the same manner as when replacing a filter. 3. Insert the accompanying pin for emergency ejection straight into the emergency ejection hole and press firmly.
DVD-R DRIVE
DVR-S201
R
DISC READ/WRITE
Filter cover
2. Once the filter cover has been removed, you will see a filter on the reverse side. Replace the old filter with a new filter. 3. Put the two hooks on the reverse of filter cover into the holes of front bezel, and follow the reverse of the procedure described in 1 above to return the filter cover to its original position.
D
V
D
-R D R IV E
R
D
V
R
-S
201
DVD-R DRIVE
DVR-S201
R
Holes of front bezel
NOTES: ÷ Always be sure to return the filter cover to its original position after replacing the filter. (Note that failing to do so may result in the breakdown or malfunctioning of the drive.) ÷ Note that sliding by force and holding down the filter cover may break hooks. Determining when the filter needs to be replaced ÷ When the filter has become noticeably dirty. ÷ When the internal overheating indicator begins to come on frequently in spite of the operating environment temperature remaining within the specified operating environment temperature range. (Note that here the �overheating indicator� is to be understood as being lit whenever READ/ WRITE orange indicator flashes repeatedly.) * Please contact after-sales service personnel or the store where you purchased your drive to purchase new filters.
4. Pull it out as far as you need to and remove the disc. (The disc tray will open about 5 to 10 mm.) NOTES: ÷ Make sure to use only the accompanying pin for emergency ejection. (No other object should be inserted.) ÷ Never attempt to forcibly eject a disc that is still rotating, as doing so could result in injury personal or in damage to the disc. ÷ Do not place items within 12 cm of the front of this device, as doing so could obstruct the disc ejection operation. ÷ Always be sure to remove the filter cover after forcibly removing a disc. Note that failing to do so may result in the breakdown or malfunctioning of the drive.
11
<DRC1101> En
English
|
|
|
> |
|
