|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
DVR-S201
SERVO MECHANISM ASSY and PICKUP ASSY 2 1
Floating Base
�4 �2
Connecting the Flexible Pickup Cable
Caution: Be sure to turn the LD short switch to the Short (lower) side when you remove the flexible pickup cable.
� Side view LD short SW Open
3
Short Remove the Pickup Flexible Cable and a connector, then remove the Servo Mechanism Assy.
4
Pickup Flexible Cable Pickup Flexible Cable Servo Mechanism Assy (Top View)
Servo Mechanism ASSY
Note: Turn the Short SW of the Pickup Assy to Short side (lower side).
1. Insert the FPC with the conductor side upward. Properly insert it to the slot until it stops. 2. Push down both sides of the lock lever until they stop. It cannot be locked with one side only. Imperfection of pushing down may cause unlocking.
FP
Pickup Assy Guide Shaft
C re
tac cep
les
2
FPC conductor side
2
1
Disconnecting the flexible pickup cable
1. Pull up the lock lever upward. 2. After unlocking, pull out the FPC.
� Rear side
1
Hook on the Tilt Base Assy
5 6
Guide Shaft
2
59
|
|
|
> |
|
