|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I'm happy. Good quality. Very helped me with my work..............................
;
This is the second Manual I have ordered from owner-manuals, I give it five stars because it is exactly what I expected given the age of the equipment. So the contents look a bit aged and the pictures a bit grainy, it fulfills my needs and I am glad I can still get hold of them.
;
thank u so much for this manual that was so cheap that i thought it was a scam but i gambled anyway because it was too good of a deal to pass up and behold,the manual has everything and details of everything even the screws and im still amazed and very happy with my manual .so take my word and jump on it before they realize how cheap they selling thier manuals..thank you so much for taking time to read my thoughts
 ;
I do not have very much to say.
The price is quite covenient, delivery was better as promised (about 12 ours, against the specified 24 hours if I remember well), and the quality of the PDF is more than acceptable.
The Service Manual of Sansui R30 itself is also satisfactory: good graphic for schematics and layouts, simple and well structured.
Giovanni Bianchi
;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
TROUBLE SHOOTING GUIDE
E-2. PREAMP IN THE PAYBACKMODE
Is signal from heads fed to pin1 and 3 of P401?
YES NO
Check the DRUM and DECK mechanism
Is ON/OFF5V from pin76 of IC301 supplied to pin131 of IC401 at 5V?
YES
NO
Check the ON/OFF 5V
Is REC(H) from pin79 of IC501 supplied to pin11 of IC401 at 0V?
YES
NO
Check Q503, Q504 and adjacent circuit
Is V.SW pulse from pin46 of IC501 supplied to pin4 of IC401?
YES
NO
Check SERVO/SYSCON
Is the signal from pin1 and 3 of P401 fed to pin17 or 19 of IC401?
YES
NO
Change IC401
Is the signal from pin7 of IC401 fed to C416?
YES
NO
Check Q401 and adjacent circuit
TO LUMINANCE SIGNAL IN THE REC MODE
NOTE : 1) REC(H) : "HIGH" in the REC mode. "LOW" in the EE and PB mode
19
|
|
|
> |
|
