|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Readable text and good copy. Very much needed if you wish to do some repairs on this fine old unit.
;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
FLOW CHART NO.13 PON 1.8V is not outputted. Is 2.5V voltage supplied at pin(1) of IC1002? Yes Is the "H" pulse inputted into pin(4) of IC1002? Yes Replace IC1002. No No Check D1013, C1014 and the periphery circuit. Check PWRCON line.
FLOW CHART NO.14 The disc tray cannot be opened and closed. (It can be done using the remote control unit.) Is 0V voltage supplied to Pin(9) of IC2001 when the OPEN/CLOSE button is activated on the DVD? No Check the SW2014 and OPEN/CLOSE button.
Yes See FLOW CHART NO. 15. <The disc tray cannot be opened and closed.>
FLOW CHART NO.15 The disc tray cannot be opened and closed. Replace the DVD Main CBA Unit. No improvement can be found. Yes Replace the DVD Mecha. No The malfunction of the original DVD Main CBA Unit.
FLOW CHART NO.16 [No Disc] is indicated. (When the focus error occur.) Replace the DVD Main CBA Unit. No improvement can be found. Yes Replace the DVD Mecha. No The malfunction of the original DVD Main CBA Unit.
1-8-4
E56H0TS
 $4.99 DVS15H SHARP
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
