SHARP DVSL16H
Owner's Manual

PLAYING A DISC Changing the On-Screen Display Digital Gamma Setting

DVD

DVD-RW
VR mode

DVD

DVD-RW
VR mode

VCD

You can check information about the current disc by pressing ON SCREEN on the remote control. 1 Press ON SCREEN during

playback to show current Chapter.

9/49

0:00:00 -0:00:00

� The elapsed and remaining playing time of the current chapter will be displayed. 2 Press ON SCREEN again to show current Title. � The elapsed and remaining playing time of the current title will be displayed. 3 Press ON SCREEN again. � The BIT RATE and the current repeat setting will be displayed. � If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing). If you are playing a DVD-RW with setting the PLAYLIST, the following will also be displayed. IIII T ORG ORG: Playing the ORIGINAL. PL: Playing the PLAYLIST. 4 Press ON SCREEN the fourth time to remove the

DIGITAL GAMMA is a digital image quality enhancement function that gives a richer image by brightening the darker and more obscure portions of the image without altering the brightness of the brighter portions, thereby making the entire image easier to see. Three digital gamma settings are available to allow for differences in the images played and in brightness of the room. 1 Press GAMMA during playback. � The current setting appears. 2 Press ENTER to switch

1,2,3,OFF.

1,2,3 : Makes the dark parts brighter. OFF : Shows the original picture as recorded. 3 Press RETURN or GAMMA to exit.

1

Marker Setup Screen

DVD CD VCD
without PBC function

CD

DVD-RW
VR mode

VCD
without PBC function

Use markers to memorise your favourite places on a disc. 1 Press MARKER during playback. � The display screen and Markers will appear on the TV screen. 2 Press s or B to select 1, 2, 3,

display.
1 Press ON SCREEN during playback, the current

OFF

Track will be displayed on the TV screen.
� The elapsed and remaining playing time of the current track will be displayed. 2 Press ON SCREEN again to show current Total

4, 5, 6, 7, 8, 9, or 10 and ensure that �- : - - : - -� appears in the display. 3 When reaches the desired point, press ENTER.
� Selected number will turn to and the point will be marked. � The Title or Track and elapsed playing time will appear in the TV screen. 4

Track.
� The elapsed and remaining playing time of the current total track will be displayed. 3 Press ON SCREEN again to remove the display.

To return to the Marker later, press MARKER during playback and s or B to choose the desired marker (one of the mark), then press ENTER.

Virtual Surround
You can enjoy stereophonic visual space on your existing stereo system.

NOTES:
� Opening the disc tray or turning off the power or select AC(All Clear) at step 2 and press ENTER will erase all Markers. � To clear a marker, using s or B, position the cursor on to the marker number to be cleared and press CLEAR. � You can mark up to 10 points. 5 Press MARKER or RETURN to exit.

DVD

CD

MP3

DVD-RW
VR mode

VCD

1 Press MODE during playback. 2 Press ENTER to set it 1(Natural effect),

2(Emphasized effect) or OFF. 3 Press MODE or RETURN to exit. NOTE (for CD or VCD play only):
� Virtual Surround will not be effective if the sound mode

is set to something other than STEREO.
� Turn down the level or turn it �OFF� if the sound is distorted.

SCREEN SAVER PROGRAMME
¡The screen saver programme starts when there is ¡To avoid the risk of screen burn, do not freeze the

no input from the Player for more than five minutes in stop mode. When the screen saver activates for 30 minutes, the power goes off automatically.
¡The screen saver programme will not start in pause

images in pause mode for more than five minutes, and turn off the display if not necessary when playing Audio or MP3 discs.

mode or when playing audio or MP3 discs. This may cause screen burn due to long-term static display.

� 18 �

EN