|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It's complete and helpful manual with good quality of scan. Thanks very much.
;
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
;
Exactly what was needed to assess the product - excellent value and great service
 ;
Nice to have the service manual for the Sony DCR-TRV345E now. The document is of excellent quality.
;
MACKIE HR824 26 pages English-only Service Manual contains:
1) HR824 technical overview with the description of front and rear panel switches.
2) HR824 specs
3) Block Diagram
4) Wiring Diagram
5) Packaging management
6) Spare part & final assembly list (for PCB rev A and B) + exploded view
7) Test Procedures (where, how to measure voltage...) including Test Point diagram on the PCB.
8) IC and Transistor charts.
Excellent guide: very clear, good scan quality enabling us to print readable diagram :-)
Note:
Mackie HR824 make extensive use of surface mount devices (SMD). Service on the HR824 must
only be undertaken by experienced service technicians with the right tools, experience and patience to perform surface mount rework when needed.
DV-SP500 SERVICE PROCEDURES-2
4. Remove the solder of Laser Diode shorting
1-1 1-2 1-3 1-4 Connect Pickup and DVD main circuit PC board by FFC(3 pcs). Fix it with the DVD Mechanism Remove the solder of Laser Diode shorting on Pickup. Connect total unit of DVD Mechanism (DVD Main PCB + Mechanism) to output terminal.
Rear View
DVDM Assy Side
Short
Open
Short SW
5. Key check mode
Press the [STOP] and [SKIP UP] keys at the same time . FL display light up, and check the FL display. (about 2 second) To cancel this process, Please press the [STOP] and [DISPLAY] keys at the same time again.
6. Factory setting (Initial setting)
3-1 Push the power switch "ON" (Mechanical switch) 3-2 Press the [STOP] and [STANDBY ON] keys at same time, and it waits until the display of FL tube will be the display of "No Disc" from "Loading".
|
|
|
> |
|
