|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
1
2
3
4
7.1.5 DISASSEMBLY
A
1 Tray Lens Assy
2 Top Cover
1 2 3
Power ON. Tray Open (0). Remove the Tray Lens Assy.
1 2
Remove two screws of the Rear Panel. Remove the Top Cover with pull up.
Top Cover
2
1
�2
B
Tray
3
C
2
Tray Lens Assy
2
1
3 Stay
How to Open the Tray by Manual Operating
In the reverse state, release the Sheet, turn the Drive Gear of the Loading Mechanism Assy to the direction of counterclockwise. If the Tray moved toward the front about 2 or 3 cm, pull out the Tray by hands. When disc is put in the Tray, be careful to come off the disc when clamp was released.
D
1 2 3 4 5 6
Remove the L Plate (Screw �1) Remove seven screws of the Stay. Remove the Flexible Cable (17P) from CN3 of the SSIB Assy. Remove three screws of the DVDM Assy. Release the Anti-dust Sheet. Remove the Stay. DVDM Assy
2 4
Driver (Small) Stay
�2
Flexible Cable (17P) 1 L Plate
2 2 4 6 3 2
CN3
2
E
Drive Gear
2 5
Tray is Open Anti-dust Sheet
F
1
SSIB Assy
66
1 2
DV-U7
3 4
|
|
|
> |
|
