|
There are currently no product reviews.
 ;
Good product. All the information is invcluded, but due to the complexity of the amplifier, it still is difficult to get it to operation again.
 ;
Very professional seller; very fast, accurate and rielable service.
;
great works fine, got the manual on mail within a day
;
First class Service,
best quality, come again
Thank You.
vac
;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
1
2
3
4
7.1.5 DISASSEMBLY
A
1 Tray Lens Assy
2 Top Cover
1 2 3
Power ON. Tray Open (0). Remove the Tray Lens Assy.
1 2
Remove two screws of the Rear Panel. Remove the Top Cover with pull up.
Top Cover
2
1
�2
B
Tray
3
C
2
Tray Lens Assy
2
1
3 Stay
How to Open the Tray by Manual Operating
In the reverse state, release the Sheet, turn the Drive Gear of the Loading Mechanism Assy to the direction of counterclockwise. If the Tray moved toward the front about 2 or 3 cm, pull out the Tray by hands. When disc is put in the Tray, be careful to come off the disc when clamp was released.
D
1 2 3 4 5 6
Remove the L Plate (Screw �1) Remove seven screws of the Stay. Remove the Flexible Cable (17P) from CN3 of the SSIB Assy. Remove three screws of the DVDM Assy. Release the Anti-dust Sheet. Remove the Stay. DVDM Assy
2 4
Driver (Small) Stay
�2
Flexible Cable (17P) 1 L Plate
2 2 4 6 3 2
CN3
2
E
Drive Gear
2 5
Tray is Open Anti-dust Sheet
F
1
SSIB Assy
66
1 2
DV-U7
3 4
|
