|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
 ;
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
;
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
;
Хорошее качество сканирования.
Мануал пришел часов эдак через 12. В целом доволен.
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, press the ON/OFF push button and close the water tap. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. If the spray nozzles become clogged with food residues, clean the spray arms as follows: Upper spray arm: � Detach the spray arm by pushing it up 1 and turning it counter-clockwise 2 then pull it down 3. � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotary mounting and insert it. Make sure the spray arm rotates freely. Lower spray arm: � Pull the spray arm up (see drawing). � Rinse the nozzles under running water. � Remount the spray arm by aligning it with the rotor pin and insert it. � Remount the spray arm and pull it down. Make sure the spray arm rotates freely. Cleaning the filters: 1. Rotate the central filter H by turning it counter-clockwise and extract it by pulling it up. 2. Pull out the cylindrical filter L and extract it from the microfilter M separate the plactic filters by gently pushing on both pieces and pull (see drawing). 3. Having removed the central filter you have also the possibility to take out the G filter (it is sufficient to lift it out). 4. Clean all the components. While Reassembling please note that the filters must be correctly assembled to ensure good washing results.
1 2 3
9
|
|
|
> |
|
