|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I must admit, I was very skeptical... $4.99 for a 74 page service manual. I've seen some very poorly scanned manuals on the Internet, but this one is VERY good quality! Even when zooming into 500%. Great Deal!
;
Very good detail, Quick service response. A useful service manual with all details. I recomend this service.
;
As Always you can find here manuals even of difficult TV scheme which are scan in almost perfect way.clear and fast!!!!!
Great work thanks!
;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
 ;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
ALIGNMENT INSTRUCTIONS
3. VERTICAL SIZE
* The VERTICAL CENTER adjustment has to be done in advance. 1) Apply a RETMA PATTERN Signal. 2) Set the TV to Normal I mode. 3) Adjust the VERTICAL SIZE of the picture with the select V.size by volume UP/DOWN keys.
4. VERTICAL S-CORRECTION ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the S-CORRECTION to obtain the same distance between horizontal lines with the S.Curve by volume UP/DOWN keys.
5. HORIZONTAL CENTER
1) Apply a RETMA PATTERN Signal. 2) Adjust picture centering with the select H.Center by volume UP/DOWN keys.
EW 1. WIDTH
1) Apply a RETMA PATTERN Signal. 2) Adjust the horizontal width to make a perfect circle with the select H.Width by volume UP/DOWN keys.
2. PARA
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select E.W Para by volume UP/DOWN keys.
3. CORNER ( Fixed : Adjust if need be )
1) Apply a CROSSHATCH PATTERN Signal. 2) Adjust the vertical line to straight with the select EW.Cor T by volume UP/DOWN keys.
1) Apply a CROSSHATCH PATTERN Signal. volume UP/DOWN keys.
4. SYMMETRY ( Fixed : Adjust if need be )
2) Adjust the symmetrical balance to be suitable with the select EW Sym by
9
|
|
|
> |
|
