|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
 ;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
 ;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
 ;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
Options:
Temp Boost Sensor:
Press the On button to assure the water is heated to proper temperature for best cleaning and drying results. If the water temperature is low, the main wash will be extended and the Heating Delay light will turn on. Press the Off button to cancel the Temp Boost Sensor. Heated Rinse and Dry Options:
To Start
Dishwasher:
After loading set the dial to the desired cycle. Press button for desired options. NOTE: Run the water from the hot water tap to clear the line of eold water before starting. Press the door until it latches. The cycle will begin with a drain prior to fill and the On indicator will light. Indicator Lights:
SANI RINSE Press the Sani Rinse button to turn the heating element on during all rinses. The Sani Rinse option helps maintain water temperature and improve drying results, HEAT DRY Press the Heat Dry button to turn the heating element on during the fan dry period. This option provides faster drying. CANCEL OPTIONS Press the Cancel Options button to turn off the heating element during both the rinses and the dry period. During dry the fan will still operate. NOTE: Sani Binse and Heat Dry can be used separately or together.
The On light indicates that the dishwasher is operating. The Heating Delay light indicates that the main wash is being extended to heat the water to proper temperature. At the end of the dry phase Clean will remain lit until the dial has been advanced. Adding a Forgotten Item:
For best cleaning, the forgotten item should be added early in the cycle. i. Unlatch the door and wait untir the sound of circulating water stops. 2. Open the door and add the item. 3. Pause before latching the door. The cycle will continue at the point it was interrupted. PAGE 9
|
|
 |
> |
|