|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Options:
Temp Boost Sensor:
Press the On button to assure the water is heated to proper temperature for best cleaning and drying results. If the water temperature is low, the main wash will be extended and the Heating Delay light will turn on. Press the Off button to cancel the Temp Boost Sensor. Heated Rinse and Dry Options:
To Start
Dishwasher:
After loading set the dial to the desired cycle. Press button for desired options. NOTE: Run the water from the hot water tap to clear the line of eold water before starting. Press the door until it latches. The cycle will begin with a drain prior to fill and the On indicator will light. Indicator Lights:
SANI RINSE Press the Sani Rinse button to turn the heating element on during all rinses. The Sani Rinse option helps maintain water temperature and improve drying results, HEAT DRY Press the Heat Dry button to turn the heating element on during the fan dry period. This option provides faster drying. CANCEL OPTIONS Press the Cancel Options button to turn off the heating element during both the rinses and the dry period. During dry the fan will still operate. NOTE: Sani Binse and Heat Dry can be used separately or together.
The On light indicates that the dishwasher is operating. The Heating Delay light indicates that the main wash is being extended to heat the water to proper temperature. At the end of the dry phase Clean will remain lit until the dial has been advanced. Adding a Forgotten Item:
For best cleaning, the forgotten item should be added early in the cycle. i. Unlatch the door and wait untir the sound of circulating water stops. 2. Open the door and add the item. 3. Pause before latching the door. The cycle will continue at the point it was interrupted. PAGE 9
|
|
|
> |
|
