|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
Options
Temp Boost Sensor If for any reason the incoming water temperature is below 120°F, press the On button to assure the water is heated to proper temperature for best cleaning and drying results. The dial will pause at the a/_ to extend the main wash and the Heating Delay light will turn on. Press the Offbutton to cancel the Temp Boost Sensor. Heated Rinse RINSE TEMP and Dry Options
To Start
Dishwasher
After loading set tbe dial to the desired cycle. Press button for desired options. NOTE: Run the water from the hot water tap to clear the line of cold water before starting. Press the door until it latches. Tile cyele will begin with a drain prior to fill. Indicator Lights
The Heating Delay light indicates that the main wash is being extended to heat the water to proper temperature. At the end of the dry phase clean will remain lit until the dial has been advanced to the _.
Press the Sani button to turn the heating element on during J1 rinses. The Sani option helps maintain water temperature and improve drying results. Press the Norm'a] button if Sani is not desired. The heating element will be turned offfor all rinses. FAN DRY Press the Heat button to turn the heating element on during the fan dry period. This option improves drying results, Press the Mr button to turn the heating element off during the }:andry period. Towel drying may be necessary, NOTE: Temp Boost Sensor, Rinse Temp and Fan Dry options can be used separately or together.
Adding
a Forgotten
Item
For best cleaning, the forgotten item should be added early in the cycle. 1. Unlatch the door and wait until the sound of circulating water stops. 2. Open the door and add the item. 3. Pause before latching the door. The cycle will continue at the point it was interrupted.
PAGE
|
|
|
> |
|
