|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this tuner.
;
I have this hi-fi system for a long time and I need to repair some things. Founding this manual will be very helpfull :)
 ;
It is pretty good. The schematics were covered all components, the manual also provide the parts list . It's useful for the trouble shooting.
;
Very fast service, best quality of the service manual and the schematics
;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
Troubleshooting > Messages and Troubleshooting
Message
Disc error has occurred. Finalizing is not complete.
Cause/condition for message to appear
Appears when the disc could not be �nalized because it was dirty. Appears if accident, such as power off, has occurred during �nalizing.
Troubleshooting
Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Set the power switch to � OFF� and reconnect the AC adapter/charger; then set the power switch to �Movie� and start �nalizing again. Or press the DISC EJECT button, reload the disc, and then execute �nalizing. Replace the disc.
Disc error has occurred. Format the disc now? YES NO
Disc error has occurred. Formatting is not complete.
If the message still appears even when the disc has been cleaned and �nalized again and again, the disc may be defective. Appears when reading or writing from/to recorded �le cannot be performed because the disc is dirty. Appears when a DVD-RAM/DVD-RW/ +RW initialized on PC, etc., or a card whose initialization was suspended before, is loaded. Appears when the disc could not be normally formatted because it was dirty.
Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Choose �YES� and designate it to initialize the DVD-RAM/DVD-RW/ +RW (deleting all recorded data).
Disc error has occurred. Keep disc inside & restart.
Refer to �4-3-5 Cleaning disc and optical pickup� and clean the disc. Or replace the disc. Also appears when a warped or distorted Replace the disc. disc was loaded, or a logically damaged disc whose formatting was suspended is loaded. Appears if a problem has occurred Exit the Disc Navigation function during editing of movie �le. and set the power switch to �OFF� with the disc loaded; then reconnect the AC adapter/charger and set the power switch to �Movie� or �Disc Still� (The DVD video camera/ recorder will automatically repair the video �le.)
4-6
|
|
|
> |
|
