|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
Troubleshooting > Messages and Troubleshooting
Message
DVD is not formatted. Format the DVD now? YES NO [Displayed only when DVDRW is used] DVD format. Select record format. VR mode VF mode
Cause/condition for message to appear
Appears when a brand-new DVD-RW/ +RW was loaded.
Troubleshooting
DVD must be �nalized before it can be played back on DVD player or DVD recorder. DVD-R, 16:9 mode cannot be changed, when Video mode is STD DVD-RW (VF) , 16:9 mode cannot be changed, when Video mode is STD DVD+RW, 16:9 mode cannot be changed, when Video mode is STD DVD-R cannot dub the scene recorded in STD mode and 16:9. DVD-RW (VF) cannot dub the scene recorded in STD mode and 16:9. +RW cannot dub the scene recorded in STD mode and 16:9. DVD-R, Different video mode, 16:9 and 4:3 mode cannot exist together. DVD-RW(VF), Different video mode, 16:9 and 4:3 mode cannot exist together.
When recording on the DVD video camera/recorder, choose �YES/ VR Mode/VF Mode� and designate it. Appears when reading or writing from/to Refer to �4-3-5 Cleaning DVD and recorded �le cannot be performed optical pickup� and clean the DVD. because the DVD is dirty. Or replace the DVD. May appear when a DVD formatted and Use a PC, etc. to check the contents recorded on a device other than DVD on DVD. video camera/recorders is loaded. Appears when an unformatted When initializing it (deleting all DVDRAM/DVD-RW/+RW or one recorded data), choose �YES� and initialized (other UDF2.0) on PC is designate it. loaded. Also appears if user rejects partial repair Choose �NO� and designate partial or total repair of video �le. repair or total repair. When initializing it (deleting all recorded data), choose �YES� and designate it. Appears if a non-�nalized DVD-RW(VF)/ Finalize the DVD-RW(VF)/DVD-R DVD-R is removed. before playing it back on another DVD device. Appears when the wide-screen mode was chosen with the video quality set to STD using a DVD-RW (VF mode)/DVD-R/+RW: The combination of STD (352 � 480 pixels) and wide-mode is prohibited by the DVD video format. Change the video quality to XTRA or FINE when using a brand-new DVDRW/DVD-R/+RW. If the DVD-RW/ DVD-R/+RW has already been recorded in STD mode, replace it.
Appears if an attempt is made to dub a Replace the disc with a DVD-RAM or movie with both STD quality and 16:9 to DVD-RW(VR), or select a movie that a DVD-RW(VF)/DVD-R/+RW from HDD. can be dubbed. The DVD video format prohibits the combination of STD (352x480 pixels) and 16:9 screen modes
Appears if an attempt is made to dub movies with 4:3 and 16:9 screen modes mixed to a DVD-RW(VF)/DVD-R from HDD. The DVD video format (DVD-RW(VF)/ DVD-R) prohibits mixing of 4:3 and 16:9 screen modes
Replace the disc with a DVD-RAM or DVD-RW(VR), or select a movie that can be dubbed.
4-8
|
|
|
> |
|
