JVC DZ-VCA1SE
Owner's Manual

s MENU-PAGE 2
[IRIS ZONE] menu Change the size of the zone where automatic sensitivity compensation (ALC, ALC+EEI) is performed. Select from [LARGE], [MEDIUM], [SMALL] or [V.STRIPE] with the [LEFT]/[RIGHT] buttons. [IRIS DET.] menu Select the level detection method for automatic sensitivity compensation (ALC, ALC+EEI) from peak detection (P), average detection (A) or both. Use the [LEFT]/ [RIGHT] buttons to select from 9 different levels. Peak detection is at the far left, while average detection is at the far right. The 7 levels in between can be used for combinations of peak detection and average detection. [GENLOCK] menu Use the [LEFT]/[RIGHT] buttons to adjust the horizontal phase for the external sync signal. Phase can be adjusted in 9 steps. Each time the button is pressed, the phase is shifted by 34 ns. Pressing the button 10 times (340 ns), moves the indication by one graduation. Adjustment up to 2.6 µs is possible. [PAGE] menu Switch menu PAGE 1 to PAGE 3 with the CURSOR [LEFT]/[RIGHT] buttons.

[DATE] menu Set the date. Use the [LEFT]/[RIGHT] buttons to select the part of the date to be changed (the numbers will blink). Use the [UP]/[DOWN] buttons to set the new value. [TIME] menu Set the time. Use the [LEFT]/[RIGHT] buttons to select the part of the time to be changed (the numbers will blink). Use the [UP]/[DOWN] buttons to set the new value. [DATE FORM] menu Change the date display format. Use the [LEFT]/[RIGHT] buttons to select one of three formats (year, month, day/day, month, year/month, day, year). The date displays change in the following order:
year, month, day day, month, year month, day, year

s MENU-PAGE 3

3 Once you start editing, the buttons function as
described below. [UP]/[DOWN] : Selects the characters. [LEFT]/[RIGHT] : Moves the cursor. [CLEAR] menu Use this menu to delete the message. When [CLEAR] is selected, the right arrow (�) and "EXECUTE" are shown. Press the [RIGHT] button. The down arrow (�) and "OK", and the up arrow (�) and "CANCEL" are shown. To delete the message, press the [DOWN] button. To cancel the operation, press the [UP] button. The right arrow (�) and "EXECUTE" indications are restored. [PAGE] menu Switch menu PAGE 1 to PAGE 3 with the CURSOR [LEFT]/[RIGHT] buttons.

Use this menu to edit the message which will be shown in the upper left corner of the screen. � The message is shown when [MESSAGE] is selected in MENU-PAGE 1's [AUXILIARY] menu. � The message can include up to 22 alphanumeric characters. Selectable characters include A to Z, 0 to 9, ., :, -, /, and space. [START] menu 1 When [START] is selected, the right arrow (�) and left arrow (�) together with "FIRST" and "LAST" are shown. 2 The RIGHT/LEFT buttons function as described below. [RIGHT] : The first character of the message can be edited. [LEFT] : The last character of the message can be edited.

19