I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Text excerpt from page 27 (click to view)
Gebrauchsanweisung
Automatisches Ein- und Ausschalten
Zum automatischen Ein- und Ausschalten müssen sowohl die Dauer als auch das Ende der Garzeit eingegeben werden. Bei der nachfolgenden Anleitung wird zuerst die Dauer und dann das Ende der Garzeit eingegeben. Es kann aber auch die umgekehrte Reihenfolge gewählt werden. 0 1. Gerät gegebenenfalls mit der Haupttaste einschalten. 2. Backofen-Funktion wählen. Evtl. Temperaturvorschlag ändern. 3. Taste Uhr W so oft drücken, bis die Funktionsleuchte auf DAUER steht. Die Temperatur-/Zeitanzeige zeigt �0.00� an. 4. Innerhalb von 5 Sekunden Taste + drücken, bis die gewünschte Dauer angezeigt wird. 5. Taste Uhr W drücken, bis die Funktionsleuchte auf ENDE steht. Die Temperatur-/Zeitanzeige zeigt das errechnete Gar-Ende an, falls der Garvorgang sofort starten würde. 6. Innerhalb von 5 Sekunden Taste + drücken, bis das gewünschte Gar-Ende angezeigt wird. Nach ca. 5 Sekunden schaltet die Funktionsleuchte vom Blinken auf Dauerleuchten um. Beide Funktionsleuchten DAUER und ENDE haben nun auf Dauerleuchten umgeschaltet. Damit ist die Uhr auf automatisches Ein- und Ausschalten eingestellt. Der Backofen schaltet sich zur errechneten Zeit automatisch ein. Bei Erreichen des Gar-Endes schaltet sich der Backofen automatisch aus und es ertönt für ca. zwei Minuten ein akustisches Signal. 7. Taste Uhr W drücken, um das Signal abzustellen. 8. Schalter Backofen-Funktionen in Null-Position drehen. 9. Gerät gegebenenfalls mit der Haupttaste ausschalten.
Automatik-Eingaben abfragen
0
Mit der Taste Uhr W die Funktion DAUER bzw. ENDE erneut wählen. Die entsprechende Funktionsleuchte beginnt zu blinken. Die �Temperatur-/Zeitanzeige� zeigt die noch verbleibende Gar-Dauer bzw. das eingegebene Gar-Ende an.