|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
i
I
Pull out to the stop, lift the front iI/l &dpullagain.
Removing and cover
the crisper,
meat drawer
Remove
the
To remove the crisper and meat drawer: 1. Slide crisper and meat drawer straight out to the stop, lift drawer, then slide out the rest of the way. 2. Replace in reverse order. To remove crisper cover: 1. Push up crisper cover glass insert from bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift out cover frame by pulling up and out. 4. Remove metal cover support. To replace crisper cover: 1. Replace metal cover support on wall supports in front section of cabinet. 2. Fit back corners into notch supports on walls of refrigerator, then lower into place. 3. Slide back of glass insert into place, then lower front. Adjusting the meat drawer temperature Cold air flows against the meat drawer through an opening between the freezer and the refrigerator. This helps keep the meat drawer colder than the rest of the refrigerator. Slide the control to let more or less cold air through.
Use control to adjust meat drawer
temperature.
I
Removing the freezer bin For proper air movement, keep the freezer bin in place when the refrigerator is operating. To remove the bin: 1. Slide bin out to the stop. 2. Lift the front to clear the stop. 3. Slide out the rest of the way. To replace the bin: 1. Place bin on the slides. 2. Make sure the stops clear the front of the slides. 3. Slide bin in.
7
|
|
|
> |
|
