Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 7 (click to view)
Removing Pull out to the stop, To remove 1. 2. 3. 4.
the crispers the crispers:
and crisper
cover
Slide the crisper straight out to the stop. Lift the front. Slide the rest of the way out. Replace in reverse order.
To remove the cover: 1. Lift front of cover off supports. 2. Lift out cover by pulling up and out. To replace the cover: 1. Fit back of cover in notch supports on walls of refrigerator. 2. Lower into place. NOTE: Glass cover will fit only above full width crisper. Crisper(s) must be removed before removing cover. Lift the cover the back. Adjusting the crisper humidity control You can control the amount of humidity in the moisture-sealed crisper. 1. The control can be adjusted to any setting between LOW and HIGH. 2. LOW (open) lets moist air out of crisper for best storage of fruits and vegetables with skins. 3. HIGH (closed) keeps moist air in the crisper for best storage of fresh leafy vegetables.
Removing Pull out to the stop, lift the front and pull again. To remove 1. 2. 3. 4.
the meat drawer the meat drawer:
and cover
Slide the meat drawer out to the stop. Lift the front. Slide the drawer the rest of the way out. Replace in reverse order.
To remove the cover: 1. Remove meat drawer and crispers. 2. Lift front of cover off supports. 3. Lift out cover by pulling up and out. To replace the cover: 1. Fit back of cover in notch supports on walls of refrigerator. 2. Lower into place. 3. Replace meat drawer and crispers.
