Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Text excerpt from page 6 (click to view)
Adjusting
crisper
Humidity
Control..
.
You can control the amount of humrdrty In the molsture-sealed crrsper 1. The control can be adjusted to any settrng between LO and HI. 2. LO (open] lets moist arr out of crisper for best storage of frurts and vegetables with skrns 3. HI (closed) best storage keeps morst arr In the crisper for of fresh leafy vegetables.
Adjusting
meat pan temperature...
Cold air flows agarnst the meat pan through an opening between the freezer and the refrigerator. This helps keep the meat pan colder than the rest of the refrigerator Set the control to let more or less cold arr through
Use Control to Adjust Meat Pan Temperatures
Adjusting
the shelves.. .
To replace: 1. Guide the rear hooks Into the slots in the shelf supports 2. Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level positron To remove door shelves: Lift up and out. l To replace: l Insert hooks Into guides on both sides . Push down.
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food Items To remove glass shelves: 1. 5lt up at front. 2. Lrft up at back. 3 Pull shelf strarght out.
Gloss shelves ore heavy Be corefui
Removing
the crisper.
meat pan and covers.. .
Snap Back into Place.
Removing Crisper and Meat Pan: 1. Slide crisper and meat pan straight out to stop. 2. Lift the front. 3. Slide the rest of the way out. 4. Replace in reverse order. Removing Covers: Covers are held in place by two supports at the back and two notched tabs in the front. I, Press front tabs out of the way 2. Lift cover front. 3. Lift bock off supports. 4. Replace in reverse order
