Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 9 (click to view)
125981580 gb.qxp
2005-09-21
07:07
Page 9
drying. This option cannot be selected with Quick Dry Quick
.
- press the START/ PAUSE closed the door.
button, after having
Half Load
This option can be selected when the load inside the drum is less or equal to the half load weight declared by the programme selected. This option will decrease the duration of the drying phase and it allows you to save energy. This option cannot be selected with time controlled dying (30 min. and 60 min.).
By selecting this option the drying time is reduced in the following COTTON programmes:
� EXTRA DRY � READY TO WEAR � STORE DRY
This option cannot be selected with Half Power and Dry Level Delay Start This option makes it possible to delay the starting of the drying programme by 30 min - 60 min - 90 min 2 hours and then by 1 hour till 20 hours. You can modify the status of the delay pressing the «Change» button sequentially. The delay you have selected is indicated in the display. option.
Long Anticrease
To be used when you are not able to remove your dried laundry just after the end of the drying cycle. Selecting this option the anticrease phase will be prolonged by an hour.
Dry Level
Selecting Dry Level option, you can choose 3 different degrees of humidity that your laundry retains. To select the requested humidity degree press the «Change» button repeatedly. When on the display appears:
Delay Start Start in 30 min.
Door
9.42 12.15
Options Change
Increased Dry
You has choosen the medium degree of drying. Drying cycle time will increase by approx. 3 min.
1200
Spin
Exit
Very Dry
Provides the highest degree of drying. Drying cycle time will increase by approx. 6 min. You must select this option after you have set the programme and before you press the START/PAUSE button. You can cancel the delay time at any moment, before you press the START/PAUSE button. If you have already pressed the START/PAUSE button and you wish to cancel the delay time proceed as follows: 1. set the dryer to PAUSE by pressing the START/PAUSE button; 2. deselect the Delay start option, changing the status; 3. press the START/PAUSE programme. button to start the
Reduced Dry
Provides the lowest degree of drying. Drying cycle time will decrease by approx. 2 min. To confirm your choice press «Exit». This option cannot be selected with Quick option
.
No Buzzer
A buzzer sounds: � when selecting the programme
� when an incorrect option selection is made � when the programme selector dial is turned to
another position during the programme or when you press an option button during the cycle
Important!
The selected delay can be changed only after selecting the drying programme again. If you wish to load other laundry to be dried after having selected the delay time option: - open the door, pressing the relative button - load your laundry
� at the end of the programme � when the water reservoir is full � if the machine is not working correctly � when the small door at the bottom is open.
By selecting this option, pressing «Change» button, the acoustic signal is switched off: � at the end of the programme � when the water reservoir is full
