|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
;
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
 ;
Clear and easy to read. All details as expected. Price acceptable , and quick delivery.
;
Quick response and exactly what I was looking for and at a great fair price!
;
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Removing the freezer basket...
For proper air movement, keep the freezer basket in place when the refrigerator is operating. To remove the basket: 1. Slide out to the stop. 2. Lift the front to clear the stop. 3. Slide out the rest of the way. To replace the basket: 1. Place basket on the slides. 2. Make sure the wire stops clear of the slides. 3. Slide basket in.
the front
Moving the meat pan...
The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan first.
To remove the meat pan and cover: 1. Slide the meat pan out to stop. 2. Lift the front of meat pan. 3. Slide pan the rest of the way out. 4. Tilt cover up at front. 5. Lift up at back. 6. Pull straight out. To replace the meat pan and cover: 1. Guide the rear hooks of cover into the slots in the shelf supports. 2. Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level position. 3. Replace meat pan in reverse order of removal.
Changing the light bulbs...
1. Push lightly
on the top center of the light shield until the notched tab unhooks from the control panel.
I
PUSH IN THE CENTER; PULL DOWN.
/
3. Lift the back hooks out of their slots, 4. Replace with a 40-watt appliance bulb. 5. Replace light shield in reverse order.
l
Freezer wall.
light shield
pulls straiaht
out from liner
I
Removing the base grille...
To remove I the grille: I
r
-To behind
METAL CLIPS SUYPORT TABS
.--1. Open the doors. � 2. Pull grille outwards as shown 3. Do not remove Tech sheet fastened grille. replace the grille: 1. Line up grille support tabs with metal clips, 2. Push firmly to snap into place. 3. Close the doors.
I
Ice cube trays...
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get
|
|
|
> |
|
