perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 9 (click to view)
� Mount the chimney holder close to the ceilingwith the rawl plugs and the screws. Warning! Be careful that it is centered over the hood and horizontally aligned. Chimney holder
Fig. 9
Centre line � Hang the hood on the wall again. Additional hanging points
Hooks
Chimney holder Chimney fixing points
Fig. 10
Tube � Secure it with the 2 lower screws. Recirculation spigot Chimney Supply cord
Fitting for ducting
� Connect a tube between the hood air outlet and the wall or roof exhaust channel.
Fitting for recirculation
� Mount the recirculation spigot with the 4 screws supplied.
Air outlet
Mounting the chimney
� Connect the supply cord to the mains. � Place the chimney and fix it to the top chimney holder with the two screws supplied. � Lower the bottom part of the chimney to the top of the hood. 41 Lower screws