great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
Superb! It's the original manual. We can now use our old calculator with its full function.
Text excerpt from page 6 (click to view)
MAINTENANCE AND CLEANING
Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. The external surfaces of the hood should be cleaned regularly. Wipe the cooker hood frequently with warm soapy water using a mild detergent. Dry thoroughly after cleaning. Always wear protective gloves when cleaning the hood. Never use scouring pads or abrasive cleaners. Never use excessive amounts of water when cleaning particularly around the control panel.
Charcoal Filter
The charcoal filters absorb the odours from cooking. They will slowly become saturated and gradually less effective. The charcoal filters cannot be cleaned, we recommend they are replaced every 3-6 months or more often if the hood is used for more than 3 hours per day.
To Remove/Replace the Charcoal Filters
1. Remove the lower grille, supporting the grille with one hand and draw down on the two grey handles (located on each side of the grille). The charcoal filters are left and right handed and should be fitted one at a time. Insert one end of the filter into the slots in the fan housing then lower the other end until the tab engages the slot in the casing.
2. 3.
Synthetic Grease Filter - EFG 525
The synthetic grease filter cannot be cleaned. It cannot be washed.
To Replace the Synthetic Grease Filter
1. 2. 3. Remove the lower grille. Push the wire retaining clips to the side and remove. Clean the metal grille and clips before
